Lighting Connection

Electrician

Have your new light fittings wired in neatly and safely

Price range:€100 – €500

Bought new ceiling lights, wall lamps or outdoor fittings and need them connected? Post a lighting connection job on FixNow, list the fittings and add photos of the existing points, then compare offers from local electricians who will wire everything correctly, check compatibility with switches and dimmers, and test that it all works.

  • Ceiling and wall light connection
  • Outdoor and garden light wiring
  • LED strip and driver installation
  • Dimmer and smart switch compatibility
  • Earthing of metal fittings checked
  • New lighting points where needed

Log in to book

Don’t have an account?

About this service

New light fittings can transform a room, but the box they arrive in rarely mentions what happens behind the ceiling rose. Connecting a light means isolating the circuit, identifying the live, neutral and earth conductors, terminating them securely in the fitting and making sure metal parts are properly earthed. Done carelessly, it leads to flickering, buzzing, overheating connectors or a fitting that becomes live to the touch.

On FixNow you can post a lighting connection job for anything from a single pendant in a Lakatamia flat to a full set of fittings in a newly renovated villa. Local electricians send offers, you compare them, and you choose who connects your lights.

Lighting connection jobs we see most

  • Replacement fittings: swapping old lights for new ones on existing ceiling or wall points.
  • Wall lights: connecting sconces and picture lights, including those on new cable runs.
  • Outdoor lighting: wiring terrace, entrance, pool-side and garden fittings with weatherproof connections.
  • LED strips and drivers: connecting under-cabinet, cove and mirror lighting with the correct transformer.
  • Dimmers and smart switches: making sure the switch and the lamps work together without flicker.
  • Additional lighting points: adding a new point where a room has none.

Compatibility is where problems hide

Most lighting faults after a DIY swap come from mismatched components rather than broken parts. Many LED lamps and fittings are not designed for older dimmers and will flicker or hum. Some smart switches need a neutral wire that older Cyprus installations do not always have at the switch. LED strips need a driver sized for their length and power, installed somewhere it can stay cool, which matters during hot summers when ceiling voids heat up.

Outdoor fittings near the coast need a suitable IP rating and corrosion-resistant fixings, otherwise sea air and humidity will reach the terminals within a couple of seasons. An electrician can advise before you buy, so it is worth sharing product links or photos in the job chat.

Preparing for the electrician’s visit

  • Unpack and check: make sure all parts, bulbs and fixings are present.
  • Gather instructions: keep the manufacturer’s leaflets handy for drivers and fittings.
  • Clear the space: move furniture away from where the ladder will stand.
  • Know your circuits: point out the fuse box so lighting circuits can be isolated.

What shapes the price

The number of fittings, the ceiling height, whether existing points can be reused or new cable is needed, the complexity of drivers, dimmers or smart controls, and how much outdoor work is involved all affect the final offer.

Booking steps

  1. Post your job free of charge with a list and photos of the fittings.
  2. Receive offers from ID-checked electricians who work in your area.
  3. Chat, compare reviews and accept the offer you prefer.
  4. Pay through FixNow; payment is released once you confirm the lights work.

Post your lighting connection job on FixNow and see your new fittings shine.

Why choose this service

Advice before you buy

Share product photos or specifications in the chat and electricians can flag compatibility issues with dimmers, drivers or switches before you spend money on fittings.

Indoor and outdoor

From a single bedroom pendant to a terrace full of wall lights, you can post one job covering every fitting and compare complete offers.

Weatherproof outdoor connections

Ask electricians how they will seal outdoor connections against rain, humidity and coastal salt air so garden lighting keeps working through the seasons.

Checked before payment

Payment stays held by FixNow until you confirm every fitting works as it should, so flickering or dead lights get sorted first.

Frequently asked questions

Why do my new LED lights flicker on the dimmer?
Many older dimmers were designed for traditional bulbs and do not work well with the low load of LEDs. The fix is usually a dimmer suited to LED loads, or lamps marked as dimmable. An electrician can check what you have and recommend a compatible combination when connecting your new fittings.
Can I connect a heavier or larger fitting to an existing light point?
Electrically it is usually fine, but the fixing matters. A large fitting may need a stronger anchor into the concrete ceiling than the old one. Mention the weight and size of the fitting when you post your job so electricians can plan suitable fixings or suggest a separate hanging service.
Do outdoor lights need special wiring?
Outdoor lights need fittings with an appropriate IP rating, weatherproof cable entries and connections protected from water. Circuits supplying outdoor lighting should have suitable RCD protection. In coastal areas, corrosion-resistant fixings help too. A qualified electrician can advise on the right approach for terraces, gardens and pool areas.
How long does it take to connect several light fittings?
Replacing a straightforward fitting on an existing point is generally quick, so a handful can often be done in a few hours. New cable runs, high ceilings, LED drivers or smart controls add time. Listing every fitting in your job post helps electricians give an accurate estimate in their offers.
Services

Electricity Connection

Before a new build, annex or long-empty property can be switched on, its electrical installation has to be ready, tested and documented. Post an electricity connection job on FixNow, describe the property and how far the work has progressed, and compare offers from local electricians who can prepare everything for the mains supply.

€100 – €500

Book now

Light Fitting Hanging

A statement chandelier or row of pendants only looks good when it hangs straight, sits at the right height and is firmly anchored. Post a light hanging job on FixNow with photos of the fitting and ceiling, and compare offers from local electricians and installers who can mount and connect it safely.

€100 – €500

Book now

Light Bulbs Changing

Some bulbs are easy to change; others sit five metres up a stairwell, behind awkward glass covers or in fittings that refuse to let go. Post a light bulb changing job on FixNow, list the bulbs and where they are, and compare offers from local handymen and electricians who can replace them safely in one visit.

€100 – €500

Book now

Fuse Box Installation

An outdated fuse box can struggle with today’s air conditioners, water heaters and kitchen appliances, and may lack modern protection against shocks. Post a fuse box installation job on FixNow and compare offers from local electricians who can fit a new consumer unit with the right breakers and RCD protection for your home.

€100 – €500

Book now

Fuse Box Repair

A breaker that will not reset, a buzzing board or a faint burning smell are signs your fuse box needs attention. Post a fuse box repair job on FixNow, describe what is happening and add photos, then compare offers from local electricians who can find the fault and repair it safely.

€100 – €500

Book now

Socket Installation

Too few sockets mean extension leads trailing across floors and adaptors stacked behind the TV. Post a socket installation job on FixNow, mark where you want new outlets, and compare offers from local electricians who can add indoor, outdoor or USB sockets on properly protected circuits.

€100 – €500

Book now